IFM3510
IFM3510
10
11
[Zero position adjustment for chronograph 2/100 second hand]
lf the chronograph 2/100 second hand should not return to zero position in the RESET
state, take the following action.
Button B
1.
Pull out the crown to the 2nd Click Position.
2.
Push the button B and set the chronograph 2/100 second hand at its zero
position.
*
The hand will advance by one graduation whenever the button A is pressed
lf it continues to be pressed, the hand will quickly be forwarded..
USE AS ALARM
8oth normal time and alarm time are displayed using the same hour and minute hands.
[Display changeover between normal time and alarm time]
1.
lf the alarm switch is pulled to ON and the crown is pulled at 1st Click Position, the
hour & minute hands will run clockwise.
2.
The position at which the running hands stop, indicates the set alarm time. A
confirming “beep” signal will sound twice.
3.
1f the crown is pushed back to the normal position, the hour and minute hands wil
quickly get back to the normal time position. At this moment, a confirming “beep”
signal will sound twice.
*
Even during this operation, the function of the daily time indication is progressing.