fesing SSIF2P15S48100C, Applications Manual

Page: 22 / 56

Figure 6-2: System Monitoring Program
7. Inspection, Cleaning and Maintenance
▪ In case of maintenance or emergency, disconnect the DC circuit
breaker on the battery side.
▪ Press and hold the battery reset key for 3S to turn off the battery.
▪ Avoid skin contact with electrolyte overflow. Before installing or
maintaining batteries, wear goggles, rubber gloves, and protective
clothing.
▪ Keep the battery loop disconnected during installation and
maintenance.
7.1 General Information

The battery product is not fully charged. It is recommended that the installation be completed
within 3 months after arrival;

During the maintenance process, do not re-install the battery in the battery product. Otherwise,
the performance of the battery will be reduced;

It is forbidden to dismantle any battery in the battery product, and it is forbidden to dissect the