HARDWARE
Page 6 of 6
2.1 Technical Specifications
Model
Art. 0725
Mass (g)
146
Air coupling (in)
1/4
Maximum pressure (MPa)
1.2
Accessories
Air connector
2.2 Identification
The following identification plate is located on the blow gun,
Art. 0725
Figure 3 – Identification plate
3 IMPROPER USE AND CONTRAINDICATIONS
IT IS STRICTLY FORBIDDEN:
To use the blow gun for purposes other than those for which it was intended.
To lock the power lever in the open position.
To use the blow gun without the proper use of appropriate PPE
To point the blow gun jet at people and/or animals.
4 MAINTENANCE
ERRORE. IL SEGNALIBRO NON È
DEFINITO.
AND CLEANING
ERRORE. IL SEGNALIBRO
NON È DEFINITO.
The compressed air connection must be kept clean and dry.
Contact the Dealer's Customer Service Centre where you purchased the items to order spare
parts.
fervi.com