HARDWARE
Page 4 of 7
1 COMMISSIONING
Before using this mini airbrush, some simple assembly is required.
To properly assemble the mini airbrush, proceed as follows:
1. Screw the compressed air tube to the threaded connector (B) on the body of the airbrush
gun, tightening firmly.
2. Screw the threaded connector at the other end of the air tube to a can of compressed air
or a compressor with a .25 inch threaded connector.
3. Insert the connector located on the lid of the paint container into the hole of the body of
the airbrush, applying light pressure to secure the connection.
1.1 How to Use the Airbrush
Adjust the amount of paint and air released from the nozzles via the adjusting rings (A)
located on the nozzles themselves.
To begin painting, simply aim the mini airbrush at the element to be painted, keeping it at a
distance of about 50 mm from the surface and press the trigger (C). While painting, move the
mini airbrush from side to side to distribute the paint as evenly as possible.
Do not point the spray at people or animals.
If the paint is not evenly distributed, adjust the amount of air/paint.
To stop the spray of paint, simply release the trigger.
Turn the dial to adjust the paint output.
Risk of Fire or Explosion
The solvents and paints can be highly flammable.
Use the mini airbrush in well ventilated areas.
Do not smoke or use an open flame when using the mini airbrush.
A
B
C
fervi.com