1.5.4 Configuring the Sweep Control Module
1.5 Configuring the Control Modules
0101-9031-0, Rev. B
17
Genius II Quick Start Guide
Figure 19 Remote Controller, Beam On @ 5%, Config Mode, Menu 1 and Pos Adjust Selected
7
Watching the beam through the viewport, use the remote controller’s
joystick to move the beam to the desired position for the –Latitude
beam position interlock limit.
8
Press the remote controller’s Menu button to select Menu 2, which is
shown in Figure 20.
9
With Menu 2 displayed, press the Set –Lat button to set the –Latitude
beam position limit at this position. The screen will then appear as
shown in Figure 20, with a white dashed line indicating the limit you
have just set.
With
Pos Adjust
selected, use the
joystick to move the beam to the
desired position for the –Lateral
position limit.
