EN
Follow the instructions given below to modify the preset automatic programme.
1. Press
the
button . If DHW programming is enabled, select the radiator symbol with the buttons
and con
fi
rm
with the button
. The 6 daily time bands
fl
ash and number 1 of DAY 1 is shown in a box to indicate that time band 1
of Monday can be modi
fi
ed.
2. Press the button . The hours and minutes start
fl
ashing: use the buttons
to change the time band start time
in 10 minute increments. By keeping the button pressed the hours and minutes will change rapidly.
3. Press
the
button . The room temperature inside the house starts
fl
ashing: use the buttons
to change the
temperature level in 0.1°C increments. By keeping the button pressed the temperature will change rapidly.
4. Press the button . The 6 daily time bands
fl
ash.
5. Then press the button
to display time band 2 of Monday, modi
fi
able by repeating steps 2 to 4.
6. The remaining time bands can be displayed by selecting bands 3, 4, 5 or 6 with buttons
and repeating step 5.
7. The programme setting for the following day can now be selected:
a. Press the button
to display DAY 2. The Tuesday programme can be modi
fi
ed by repeating steps 2 to 6.
b. To copy the Monday programme to Tuesday, press the button
. To copy the same programme also to the other days
of the week, press the button
repeatedly.
Important!
When setting the programme make sure each band has a different start time.
Personal programme note
Monday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Tuesday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Wednesday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Thursday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Friday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Saturday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Sunday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
Temperature level
Step 5. Operation mode selection
OFF mode selection
- If you are going away for prolonged period (also see Holiday Function) or if you simply want to switch off
the heating, press the button
and the symbol
is displayed. The heating is switched off, and switched on again
only if the room temperature falls below 5°C: freezing protection function. If equipped with a hot water tank, the boiler will not
deliver domestic hot water; instant-type hot water boilers will deliver hot water.
Summer mode selection
- To switch off the heating while maintaining the domestic hot water function, press the button
and the symbol
is displayed. The heating is switched off, and switched on again only if the room temperature falls below 5°C:
freezing protection function. Whatever the type of boiler, it will deliver hot water.
Winter mode selection
- To reactivate heating and restore the previously set operation mode, press the button
again
and the symbol
will appear on the display. Whatever the type of boiler, it will deliver hot water.
Heating automatic operation (in Winter mode)
- Press the button
and the symbol
will appear
on the display. The Remote Control will function according to the automatic weekly programme, displaying
the 6 time bands: the time band active at that moment is displayed in a box. If the box is not shown, this
means that the current time is between 00:00 hours and the start of time band 1.
Set temperature level exclusion -
In automatic mode the room temperature value can be temporarily changed by pressing the
buttons
in 0.1°C increments. By keeping the button pressed the temperature will change rapidly. The exclusion function,
indicated on the display by the symbol
flashing, will be cancelled at the next time band change.
Heating manual operation (in Winter mode) - To use the Remote Control at a
fi
xed room temperature level,
press the button
and the symbol appears on the display (the 6 time bands are not displayed).
Then set the room temperature value by pressing the buttons
in 0.1°C increments. By keeping the
button pressed the temperature will change rapidly. Manual mode will be maintained until another operation
mode is selected.
Step 6. Heating - DHW temperature adjustment
Heating
- Press the button
: the display shows the current heating circuit water temperature setting, adjustable using the
buttons
in 1°C increments. Press any button to exit the menu.
DHW (domestic hot water)
- Press the button
: the display shows the current domestic hot water temperature setting,
adjustable using the buttons
in 1°C increments. Press any button to exit the menu.
SPECIAL FUNCTIONS
Holiday Function
The Holiday Function is used to switch off heating (also domestic hot water production for boilers with a storage tank) for a given
period of time, from 1 hour to 45 days, adjustable in 1 hour increments. This makes it possible to save energy when away from
home, whereas the previously set operation mode resumes as soon as the Holiday function ends. Heating is activated only if the
room temperature falls below 5°C: freezing protection function.
Follow the instructions given below to activate and set the Holiday function.
1. Press
the
button
. The symbol
starts
fl
ashing and the hours and minutes become -00:01, which is the time
remaining before the end of the Holiday function.
2. Use
the
buttons
to extend the time remaining until the end of the Holiday function in 1 hour increments (-00:01
means 1 hour; -45:00 means 45 days). By keeping the button pressed the time and days will change rapidly.
3. During the Holiday function the display will continue to show the time remaining until the end of the function.
To cancel the Holiday function press the button
or any other button associated with a different operation
mode.
1
OFF, summer-winter mode/reset faults selection
button
2
Automatic/manual heating mode button
3
Heating - DHW programming button
4
Time and day setting button
5
Heating temperature adjustment button
6
DHW temperature adjustment button
7
User information/settings button
8
Holiday function button/copy heating - DHW programme
day
9
Manual room temperature decrease button
10
Manual room temperature increase button
11
Heating programme time bands
12
Day of week
13
Hours and minutes
14
OFF mode
15
Heating manual mode
16
Heating automatic mode
17
Holiday function
18
Burner on and current power level
19
Summer mode
20
DHW mode
21
Winter mode
22
Heating mode
23
Fault
24
Room temperature
25
Room antifreeze
26
External temperature (only with optional external probe
connected)
27
Batteries
fl
at
28
Flashing: Finding synch.
Fixed: RF communication ok
OVERVIEW OF RF REMOTE CONTROL
1
2
3
10
9
8
4
5
6
7
14 15 16
17
11
19 12 13
18
21
25
23
22
26
24
20
27 28
OVERVIEW OF RF BRIDGE
3
1
2
1
- Left LED
2
- TEST mode button
3
- Right LED
CONFIGURE AND ACTIVATE THE REMOTE CONTROL IN 6 EASY STEPS
Step 1. Installation check (RF BRIDGE)
Make sure the RF bridge is electrically fed through the connection with the boiler card. The left LED must activate 3 fast blinks
every 2 seconds.
Step 2. Battery installation (RF REMOTE CONTROL)
Note:
Follow the instructions in only if installing the RF Remote Control for the
fi
rst time
or if the RF Remote Control display activates the symbol
or if the display is off (no symbols or numbers appear).
Otherwise go straight to Step 3:
Correct setting of time and day
.
To install the batteries:
1. Remove the front cover by prising with a screwdriver at points A and B as shown in the
fi
gure, to access the batteries.
A
B
2. Insert the two 1.5V AA LR6 alkaline batteries supplied with the RF Remote Control, making sure to
fi
t them in the right
direction (indicated inside the front part).
3. Re
fi
t the front part of the RF Remote Control. (Make sure to centre the front part on the rear part to ensure correct insertion
of the contacts).
4. Wait:
fi
nding synchronism between RF Remote Control and RF Bridge. The operation ends when the symbol (
) shown on
the RF Remote Control display stops
fl
ashing. Otherwise remove the batteries from the RF Remote Control and repeat Steps
1 and 2: if necessary, bring the RF Remote Control nearer the RF Bridge to obtain more reliable RF communication.
Step 3. Setting the time and day
1. Press the button
. The day starts
fl
ashing: use the
buttons to set the correct day of the week, where DAY
1 is Monday and DAY 7 is Sunday.
2. Press the button
. The hours start
fl
ashing: use the
buttons to set the correct hours from 00 to 23.
3. Press the button
. The minutes starts
fl
ashing: use the buttons
to set the correct minutes from 00 to
59.
4. Press the button
.
Step 4. Setting the automatic weekly programme
Once the time and day have been set, the Remote Control will follow the preset automatic programme. The heating programme
provides for 6 daily time bands for temperature levels, numbered from 1 to 6. The time bands can be set between 00:00 and
24:00 in 10 minute increments. Each temperature level can be set between 7°C and 32.5°C in 0.1°C increments. Therefore any
combination of time and temperature during the day can be programmed, and different for each day of the week. The preset
automatic programme is:
From Monday to Friday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
06:30
08:00
12:00
14:00
18:00
22:30
Temperature level
21°C
18°C
21°C
18°C
21°C
16°C
From Saturday to Sunday
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Start time
08:00
10:00
12:00
14:00
18:00
22:30
Temperature level
21°C
21°C
21°C
21°C
21°C
16°C
