5
CONTROL INSTALLATION
First it is necessary to choose where to install the remote controller; according to the size and the length of the
connections, arrange a raceway suitable for holding the connection cables or a special junction box. The figure below
shows the dimensions of the control .
To secure the remote control, remove the front part, carefully remove the electronic board inside (fixed with screws to
the rest of the structure) and fix the control by means of two screws, as shown in the figures below.
When installing the remote control, pay special attention to the direction in which it is fixed; make sure the plate is
oriented correctly before securing the anchor screws .
No . Name
1 Surface of wall or recess-mounting box
2 Back of remote controller
3 Screw M4 x 10
4 Remote controller
Attention: The controller is equipped with a 7m long cable .
Do not install the remote controller in a place where it could come into direct contact with flows of water or
large amounts of steam.
UNIT TECHNICAL DATA
44
44
12
120
60
12
88
20
Fig .1
Fig .2
Summary of Contents for Rem W
Page 27: ...15...
