Ferroli Rem I, User Manual, Page: 15 / 20

7
STARTUP
AUTO
FAN
ON CANCEL OFF
MODE
SLEEP LOUVER
SWING
TIMER FUNCTION
23
18
:
88
AM
PM
OFF
ON
°C
AUTO
23
18
:
88
AM
PM
OFF
ON
°C
AUTO
FAN
ON CANCEL OFF
MODE
SLEEP LOUVER
SWING
TIMER FUNCTION
23
18
:
88
AM
PM
OFF
ON
°C
AUTO
23
18
:
88
AM
PM
OFF
ON
°C
BATTERY INSERTION/REPLACEMENT
OPERATION MODE
TEMPERATURE ADJUSTMENT
Press the “MODE” button (Fig .6) to select from the various operation modes:
AUTO - COOL- DEHUMIDIFICATION - FAN - HEAT .
1 . AUTO Automatic Mode: select this function by pressing the MODE button until the
cool and heat symbol appear on the display at the same time . The unit automatically
sets the operation mode (COOL-HEAT) according to the temperature of the water
reaching the unit .
2 . COOL Cooling mode: select this function by pressing the MODE button until the
relevant symbol appears on the display . The unit starts to operate in cooling mode
and quickly goes near the required room temperature .
3 . DEHUMIDIFICATION Dehumidification mode: select this function by pressing the
MODE button until the relevant symbol appears on the display . The unit starts to
operate in cooling with off/off times that depend on the ambient temperature . The
fan speed cannot be changed .
4 . FAN Ventilation mode: select this function by pressing the MODE button until the
relevant symbol appears on the display .
5 . HEAT Heating mode: select this function by pressing the MODE button until the
relevant symbol appears on the display . The unit starts to operate in heating and
quickly goes near the required room temperature .
Fig .5
1
2
3
Fig .6
Fig .7
When inserting/replacing the batteries, proceed as described below:
1 . Remove the cover (1) .
2 . Remove the old batteries and insert new ones (2), making sure they are positioned
according to the diagram inside .
3 . Refit the cover (3) .
N .B .: Remove the batteries from the remote control when the air conditioner is not
used for long periods, and place them out of reach of children .
Respect for the environment and the safety of persons; the replaced batteries must
be disposed of in special containers .
Press the (▲) and (▼) buttons (Fig 7) to increase or decrease the desired room
temperature .
(▲) increases, (▼) decreases. The temperature can be selected between 10°C and
35°C at 1°C steps.
If the selected temperature is higher than room temperature in cooling mode, or
lower in heating, the air conditioner will not start .