background image

MODENA S HE

2

EN

cod. 3541C360  -  04/2012  (Rev. 00)

B

Carefully read the warnings in this instruction book-
let since they provide important information on safe
installation, use and maintenance.

This instruction booklet is an integral part of the
product and must be carefully kept by the user for fu-
ture reference.

If the unit is sold or transferred to another owner or if
it is to be moved, always make sure that the booklet
accompanies the boiler so that it can be consulted
by the new owner and/or installer.

Installation and maintenance must be carried out by
professionally qualified personnel, according to cur-
rent regulations and the manufacturer's instructions.

Incorrect installation or poor maintenance can cause
damage or physical injury. The manufacturer de-
clines any responsibility for damage caused by er-
rors in installation and use or by failure to follow the
manufacturer's instructions.

Before carrying out any cleaning or maintenance oper-
ation, DISCONNECT AND ISOLATE the boiler from the
electrical power supply.

In case the unit breaks down and/or functions poorly,
deactivate it, do not make any attempt to repair it or
directly intervene. Contact professionally qualified
personnel. Any repair/replacement of products must
only be carried out by qualified professional person-
nel using exclusively genuine parts. Failure to com-
ply with the above could affect the safety of the unit.

Periodical maintenance carried out by qualified per-
sonnel is essential for guaranteeing good operation
of the unit.

This unit must only be used for the purpose for which
it was designed. Any other use is considered im-
proper and therefore hazardous.

After removing the packing, check the integrity of the
contents. Packing materials must not be left within the
reach of children as they are potentially hazardous.

In case of doubt do not use the unit, and contact the
supplier.

The images shown in this manual are a simplified
representation of the product. In this representation
there may be slight, unimportant differences with the
supplied product. 

Whilst every effort is taken to ensure the accuracy of
the information contained within these instructions,
the details are offered in good faith and the Manufac-
turer accepts no liability for matters arising as a re-
sult of errors and/or omissions.

Due to the Manufacturers continuous product re-
search and development, the details contained in
this manual may not truly reflect the actual product.

IMPORTANT

Your "benchmark" Installation, Commissioning and Service Record Log Book is enclosed in the 
last pages of this manual. “This record must be completed and left with the end user

”.

  Ferroli is a member of the Benchmark initiative and fully supports the aims of the programme. 

Benchmark has been introduced to improve the standards of installation and commissioning of 
central heating systems in the UK and to encourage the regular servicing of all central heating 
systems to ensure safety and efficiency. Please see installation and servicing guidelines.

"Ferroli declare that no substances harmful to health are contained in the appliance or used 
during the appliance manufacture

”.

B

This symbol indicates 

"Caution"

 and is placed next to all safety warnings. Strictly follow

these instructions in order to avoid danger and damage to persons, animals and things.

A

This symbols calls attention to a note or important notice.

Summary of Contents for MODENA S HE





































Reviews: