Installation and maintenance manual
pag.
3
/
19
3
CONSTRUCTION CHARACTERISTICS
1
90 lt heat pump
2
Control panel.
3
Steel tank (boiler) with enamelling according
to UNI standards (capacity 90 liters).
4
Heat pump unity
5 High-efficiency finned evaporator. The
quantity of fluid put into this is regulated by
an appropriate thermostatic valve (throttle
valve).
6
Coolant recharge.
7
Air recirculation radial fan.
8
Throttle valve.
9
Fixing bracket.
10 Replaceable magnesium anode.
11 Air outlet ( 125 mm).
12 Hermetically-sealed rotary compressor.
13 Upper boiler probe.
14 Lower boiler probe.
15 Additional electrical heating element 1.2 Kw
16 Bipolar safety thermostat with manual reset.
17
Condenser wrapped externally, not in
contact with water.
18 Hot water outlet connection joint (½”).
19 Cold water inlet connection joint (½”).
20 Condensate drain (½”).