Page
4
of
7
2.
Location of the SSO
•
Make sure there is enough space around the SSO to enable a safe installation and
steady airflow.
•
The SSO should not be located in direct sunlight.
•
It is recommended that the SSO are mounted close to the PV-Panels.
Advantages:
•
Increased safety since the SSO can disconnect the PV-pannels from the DC-link if a
failure occurs.
•
The cables from each SSO can be merged together through a distribution board so less
cables are needed between the SSO and the inverter
.
3.
PV connection
•
Connect the Sunclix-contacts to the cables. The one marked with a + to the PV+ cable
and the one marked with – to the PV- cable.
•
Connect the Sunclix-cables to the SSO