Ferris ISX800Z Series Operator'S Manual Download Page 29

Not for 

Reproduction

29

Improper Use and Abuse

 - The proper, intended use of

this product is described in the Operator's Manual. Using

the product in a way not described in the Operator's Manual

or using the product after it has been damaged will not be

covered under this warranty. Warranty coverage will also

not be provided if the serial number on the product has been

removed or the product has been altered or modified in any

way, or if the product has evidence of abuse such as impact

damage, or water/chemical corrosion damage.

Improper Maintenance or Repair

 - This product must be

maintained according to the procedures and schedules

provided in the Operator's Manual, and serviced or repaired

using genuine Briggs & Stratton parts or equivalent. Damage

caused by lack of maintenance or use of non-original or non-

equivalent parts is not covered by warranty.

Normal Wear and Tear

 - Like all mechanical devices, the

unit is subject to wear even when properly maintained. This

warranty does not cover replacement or repairs when normal

use has exhausted the life of a part or the equipment. Except

as noted in the warranty period, maintenance and wear items

such as filters, belts, cutting blades, and brake pads (except

engine brake pads) are not covered by warranty due to wear

characteristics alone, unless the cause is due to defects in

material or workmanship.

Stale or Unapproved Fuel

 - In order to function correctly,

this product requires fresh fuel that conforms to the criteria

specified in the Operator's Manual. Engine or equipment

damage caused by stale fuel or the use of unapproved

fuels (such as E15 or E85 ethanol blends) is not covered by

warranty.

Other Exclusions

 - This warranty excludes damage due

to accident, abuse, modifications, alterations, improper

servicing, freezing or chemical deterioration. Attachments

or accessories that were not originally packaged with the

product are also excluded. This warranty does not include

used, reconditioned, second-hand, or demonstration

equipment or engines. This warranty also excludes failures

due to acts of God and other force majeure events beyond

the manufacturer's control.

Summary of Contents for ISX800Z Series

































Reviews: