12
www.ferrisindustries.com
Transmission Release Levers
The transmission release levers deactivate the transaxle
so that the unit can be pushed by hand. See
Pushing The
Unit By Hand
for operational information.
Control Functions
The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require
the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to
use for various tasks see the OPERATION section.
Cutting Height Adjustment Handles
The cutting height adjustment handles control the mower
deck cutting height. To raise the mower deck cutting
height crank the cutting height adjustment handles
clockwise. To lower the mower deck cutting height, crank
the cutting height adjustment handles counter-clockwise.
To ensure an even cut, both cutting height adjustment
handles must be adjusted to the same height.
Transmission Oil Fill
Transmission oil is added through the transmission oil
reservoirs. It also serves as extra holding capacity for
oil as the transmissions heat up and the oil expands.
See
Check Transmission Oil
for oil level check and fill
procedures.
Fuel Tank Cap
To remove the cap turn counter-clockwise.
Features and Controls
S/N: 2013964104 & Below
Not
for
Reproduction
