background image

15

Specifications

Specifications

NOTE: Specifications are correct at time of printing 
and are subject to change without notice.

ENGINE

15 Gross HP† Kawasaki

Make

Kawasaki

Model

FS481V-DS00-S

Displacement

36.8 Cu. In (603 cc)

Electrical System

12 volt, 15 amp charging coil;
Battery: 340 cca

Oil Capacity

1.8 US qt. (1.7 L) w/ filter

Power Ratings:

 All power levels are stated gross horsepower per 

SAE J2723 as rated by Kawasaki and tested per the SAE J1995 
test standard. The gross power curves and more information can be 
viewed at www.kawasaki-criticalpower.com.

CHASSIS

Fuel Tank

Capacity: 4 Gallons (15.1 L)

Drive Tires

Tire Size: 16 x 6.50 -12
Inflation Pressure: 15 psi (1,03 bar)

Front Tires

Tire Size: 9 x 3.5 - 6
Inflation Pressure: 25 psi (1,72 bar)

TRANSMISSIONS

HydroGear 334

Type

Unitized Drive Transaxle

Hydraulic Fluid

HydroGear 20W-50 oil

Speeds
@ 3400 rpm

Forward: 0-5.5 MPH (0-8.85 km/h)
Reverse: 0-2 MPH (0-3.22 km/h)

DIMENSIONS

Overall Length

72” (183 cm)

Overall Width

48” (122 cm)

Height

41” (104 cm)

Weight (apx.)

355 lbs. (161 kg)

Not 

for  

Reproduction

Summary of Contents for 5900543

























Reviews: