14
www.ferrisindustries.com
Operation
WARNING
If you do not understand how a specific control
functions, or have not yet thoroughly read the
FEATURES & CONTROLS section, do so now.
Do NOT attempt to operate the tractor without
first becoming familiar with the location and
function of ALL controls.
STARTING THE ENGINE
1. While sitting in the operator’s seat with your feet
placed on the foot rests, engage the parking brake
and make sure the PTO switch is disengaged.
2.
NOTE: A warm engine may not require
choking.
Set the engine throttle control to FAST throttle
position. Then fully close the choke by pulling the
knob OUT fully.
3. Insert the key into the ignition switch and turn it to
START.
4. After the engine starts, gradually open the choke
(push knob down fully). Reduce to half throttle
speed and allow engine to warm up.
Warm up the engine by running it for at least a minute
before engaging the PTO switch or driving the rider.
5. After warming the engine, ALWAYS operate
the unit at FULL THROTTLE when mowing.
In the event of an emergency the engine can be
stopped by simply turning the ignition switch
to STOP.
Use this method only in emergency
situations. For normal engine shut down follow the
procedure given in STOPPING THE TRACTOR AND
ENGINE.
STOPPING THE TRACTOR AND
ENGINE
1. Taking your foot off of the transmission foot
control pedal will return the transmission to neutral
and stop tractor movement.
2. Disengage the PTO by pushing down on the PTO
switch.
3. Engage the parking brake by pulling the handle
towards the operator until it locks into position.
4. Move the throttle control to mid-throttle position
and turn the ignition key to OFF Remove the key.
Not
for
Reproduction
