28
27
46CM Petrol Lawnmower
46CM Petrol Lawnmower
GB
IE
GB
IE
Air Filter
NOTE!
Never run the engine without the air filter element installed.
The air cleaner system uses a foam filter.
1. Open the cover (B).
2. Remove the filter(C).
3. Wash the foam element in liquid detergent and water. Squeeze
dry the foam element in a clean cloth.
4. Install the filter(C).
5. Close the cover(B).
Oil
Tilt the lawnmower towards the oil filler, have a container ready
to catch the oil and remove the dipstick. Once the oil has been
emptied, wipe clean any spillages.
Refill with 470ml SAE30 oil or equivalent ie SAE5W/30, SAE10W/30).
When the dipstick is rested on the filler pipe (i.e. not screwed in
place), the oil level must be between the min and max marks on
the dipstick (Fig 8).
See “Filling with Engine Oil’’. Do not overfill.
Start the engine and allow it to run briefly.
Stop the engine, wait one minute and check the oil level. Top up
if necessary.
NOTE!
For more information see the Engine Manual.
Blades
For safety reasons you should only ever have your blade
sharpened, balanced and mounted by an authorised service
workshop. For optimum results it is recommended that the
blade should be inspected once a year.
NOTE!
For engine maintenance, see more details in the Engine Manual.
NOTE!
Before you remove the hybrid collection box, stop the engine
and wait until the blade stops completely.
NOTE!
You will need garden gloves (not provided) and a spanner
wrench to remove the blade.
Maintenance
Maintenance
