Ferret CFWF50A, Instruction Manual

Page: 6 / 12

Turn On/Off – Slide the switch at the rear of the camera to turn the
camera on or off. When turned on the front LEDs will illuminate and
a rear power indication LED will also illuminate.
Charge – Connect the supplied power supply. While the camera is
charging the red LED at the rear will illuminate. Once fully charged
the red LED at the rear will turn off.
Note:
When the camera is screwed on to fish sticks (push-pull rods)
and in use, take care not to twist the sticks (rod) too far anti-
clockwise as this may result in the camera unscrewing and
becoming disconnected from the stick (rod).