© Ferno-Washington, Inc. / 00148-AU-V4 / AUG 2021
22
5.9 Folding and Storing the
1. Unstrap and remove all items from the .
2. Remove the from the cot or iN∫X and set it on a flat
surface (See
Removing the ,
page 17).
3. Unlock one side frame by pressing the yellow
secondary catch (Figure 42, page 21). Pivot the red release
handle 90° to the unlocked position, and then rotate the
side frame 270° so it lays flat against the rear frame of
the .
4. Support the tray with one hand while completing Step 5.
5. Unlock the second side frame by pressing the
secondary catch. Pivot the red release handle 90° to the
unlocked position, and then rotate the side frame 270°
so it lays flat against the first side frame (Figure 45).
6. Lower/fold the tray.
7. To secure the legs and tray, unbuckle one of the equipment
straps that span the width of the tray. Twist and wrap the strap
around the rear of the and buckle the strap to secure
the legs (Figures 46 and 47).
8. Remove and store, or neatly arrange the remaining straps to
prevent damage to the straps.
9. Store the in a clean, dry place when not in use.
45
46
47
Unbuckle Restraint
and Wrap Legs
Twist and Buckle
Restraint Straps
Using the
