4
© Ferno-Washington, Inc 234-3488-00 April 2012
Side Extension Panel 069-5796 and 000SEPKIT
9. If the rubber stopper is not against the bottom of the
embalming table, turn the wingnut counterclockwise
to loosen the assembly (Figure 5).
Figure 5 - Loosen the Wingnut
10. Adjust the rubber stopper by turning it counterclockwise
till it firmly rests against the bottom of the embalming
table (Figure 6).
Figure 6 - Adjust the Rubber Stopper
11. Once adjusted, re-tighten the wingnut by turning it
clockwise (Figure 7).
Figure 7 - Re-Tighten the Wingnut
12. The attached SEP will look like the one in Figure 8.
Figure 8 - SEP Attached to the Embalming Table
