background image

go

(VHI ADVANTAGE PRO) 

ADVANTAGE PRO HARNESS

USER INSTRUCTIONS 

AdvantagePro Instructions: ID# 00152-V1- 08/2012

HARNESS DESIGNATION:

FALL ARREST HARNESS

GENERAL USE:

Safety harness for use in situations where there is a risk of free fall

SUGGESTED APPLICATIONS:

Tower; Pole work; Rescue; Abseil

COMPLIANCE

Complies with AS/NZ 1891.1

ATTACHMENT POINTS

Ensure you are familiar with all the attachment points on 

this harness and their limitations. Each attachment point is 

labelled appropriately.

Fall Arrest Attachment Points

 

(refer notes on Energy Absorbers)

1.  Rear dorsal D-ring is rated as a fall arrest attachment point

2.  Extension strap on rear dorsal D-ring is rated as a fall 

arrest attachment point

3.  One front ‘O’ ring attachment point. Ensure you feed 

adjustment male buckle (the one with the tongue) 

through the back of the “O” ring and connect to the 

female buckle.

Pole Strap Attachment Points

The large aluminium rings on the thighs are rated as Pole 

Strap attachment points only. The connection rings must 

be loaded equally with a pole strap as approved by Ferno 

Australia. Do not connect to one ring only.

ENERGY ABSORBING LANYARDS

A Ferno energy absorbing lanyard must be used to connect 

into a fall arrest attachment point. NOTE: The lanyard used 

on the Dorsal Extension must not exceed 1.6 m in length.

FRONT VIEW OF HARNESS AND FEATURES 

HEAD OFFICE: 11 Johnstone Road, Brendale, QLD 4500 

Toll Free: 1800 804 647    |   Tel: +61 7 3881 4999   |   Email: [email protected]   |   www.ferno.com.au    

Australia

Adjustable straps 

for centralising 

Front Attachment 

Point

Neoprene Buckle 

Protector on chest 

straps

Central Front Fall 

Arrest/Rescue/Ab-

seil Attachment 

Point

Splash proof 

and water 

resistant 

webbing

Rear Dorsal 

Fall Arrest 

Extension 

Attachment 

Point

Pole Strap 

attachment 

point on 

either side of 

harness

REAR VIEW OF HARNESS AND FEATURES 

Rear Dorsal “D” At-

tachment Point with 

extension and neoprene 

protective cover

Rear Gear/

Equipment 

Loops

Removable 

Shoulder Pad 

with reflec-

tive grey 

material

Wide one-

piece leg 

supporting 

loops

Wide com-

fortable Waist 

Belt with 

reflective 

& photolu-

minescent 

(glow-in-the-

dark) material

Front Fall Arrest 

Attachment Strap 

& Leg Strap Quick 

Connect Buckles

Colour-coded 

buckles:

RED = Front 

adjustment buckle

BLACK = Leg strap 

buckle

WARNING 

1.  A lanyard assembly should be secured to an anchorage 

point that is at a level which will result in the minimum 

free fall and the least total fall distance consistent with 

the wearer’s ability to carry out work tasks. The maximum 

allowable free fall is no more than 2 m.

2.  Energy absorbers that absorb energy by permanent 

deformation or destructive action should be discarded if 

that process has commenced.

Summary of Contents for ADVANTAGE PRO

Page 1: ... lanyard used on the Dorsal Extension must not exceed 1 6 m in length FRONT VIEW OF HARNESS AND FEATURES HEAD OFFICE 11 Johnstone Road Brendale QLD 4500 Toll Free 1800 804 647 Tel 61 7 3881 4999 Email sales ferno com au www ferno com au Australia Adjustable straps for centralising Front Attachment Point Neoprene Buckle Protector on chest straps Central Front Fall Arrest Rescue Ab seil Attachment P...

Page 2: ... a comfortable fit Check that the rear D ring is positioned centrally on your back between your shoulder blades If the positioning is not correct remove the harness and slide the D ring along the straps into the desired position and repeat Step 5 8 Tighten and adjust the shoulder straps Re adjust the front fall arrest attachment strap and leg buckles The finished fitting should feel snug but not r...

Page 3: ... by a competent person and have read and understood the following warnings in accordance with AS NZS 1891 1 1 Working at heights can be dangerous If you use Ferno equipment you are responsible for learning and observing safe techniques Ferno Australia disclaims all liability for any injury or loss arising from the use of this equipment when its hardware stitching or webbing is frayed damaged or in...

Page 4: ...ufacturer to determine whether the part is suitable for continued use WARNING Harnesses and lanyard assemblies should be destroyed or returned to the manufacturer for inspection if a fall has been sustained 2 During Periodic Inspection Hand wash the product with Ferno Rope Harness Wash every alternate periodic inspection ie every twelve months Do not machine wash Hang the product in a shaded area ...

Reviews: