4
© Ferno-Washington, Inc 234-0231-03 September 2013
Model 417-1
Harness Restraint
Limited Warranty statement
The products sold by Ferno are covered by a limited warranty,
which is printed on the invoice you received when you purchased
the product. Please refer to the warranty terms as printed on your
invoice. The complete terms and conditions of the limited warranty,
and the limitations of liability and disclaimers, are also available upon
request by calling Ferno at 1.800.733.3766 or 1.937.382.1451.
Maintenance schedule
The restraint requires regular maintenance. Set up and follow a
maintenance schedule. Conduct maintenance as follows:
●
Inspecting:
Inspect the restraint as needed, following the
Inspection Checklist below. At minimum, inspect monthly.
●
Disinfecting:
Disinfect the restraint after each use.
●
Cleaning:
Clean the restraint as needed.
Inspection checklist
●
Are all components present?
●
Is restraint webbing in good condition (no cuts/frayed edges)?
●
Are restraint buckles and slide bars free of visible damage?
●
Do buckles open and close smoothly and properly?
●
Can strap length be adjusted smoothly and properly?
●
If used on a cot, is the guide strap properly attached and
located so it will not interfere with equipment function?
If inspection indicates damage or excessive wear, take the restraint
out of service and destroy it.
Disinfecting the restraint
1. Remove the restraint from the equipment.
2. Spray the metal buckles and slide bars with a disinfectant
cleaner, following the disinfectant manufacturer’s instructions
for application method and contact time.
Do not immerse the
buckles or slide bars in liquid.
3. Hang the restraint to air-dry if needed. Attach only dry
restraints to the equipment.
cleaning the restraint
1. Immerse the restraint webbing in a solution of mild soap and
water.
Do not immerse the buckles or slide bars in the
solution.
2. Repeatedly dip the webbing in clear water to rinse.
Do not
immerse buckles or slide bars in liquid.
3. Hang the restraint to air-dry. Attach only clean, dry restraints
to the equipment.
Important
Metal buckles and slide bars can be damaged by
immersion in liquids or by washing-machine action.
Disinfect and clean only as described in this manual.
Ferno technical support
Customer service and product support are important aspects of
each Ferno product. For technical support questions:
Telephone (Toll-free)
1.800.733.3766 ext. 1010
Telephone
1.937.382.1451 ext. 1010
Ferno customer relations
canaDa anD the U.s.a.
Telephone (Toll-free)
1.877.733.0911
Telephone
1.937.382.1451
Fax (Toll-free)
1.888.388.1349
Fax
1.937.382.1191
Internet
www.ferno.com
aLL Other LOcatIOns
For assistance or information, contact your Ferno distributor. If you
do not have a Ferno distributor, contact Ferno Customer Relations:
Telephone
+1.937.382.1451
Fax
+1.937.382.6569
Internet
www.ferno.com
Ferno-Washington, Inc.
70 Weil Way
Wilmington, Ohio 45177-9371 U.S.A.
restraint versions
031-3914
417-1 Restraint, Orange
031-3915
417-1 Restraint, Black
031-3945
Guide Strap, Black (only)
ote:
Only restraints shipped with Ferno
®
cots include the guide
strap. For replacement, order a restraint plus a guide strap.
WarnInG
Improper maintenance can cause injury. Maintain
the restraint only as described in this manual.
Important
Disinfectants and cleaners containing bleach,
phenolics, or iodines can cause damage. Do not use
products containing these chemicals.
