6
© Ferno-Washington, Inc. 234-3356-00 August 2006
Model 28-Z PROFlexx
®
Chair Cot
1.5 Safety and Instruction Labels
Safety and instruction labels place important information from the users’ manual on the cot. Read and follow label
instructions. Replace worn or damaged labels immediately. New labels are available from EMSAR (page 30) or
from your distributor.
The following labels are affixed to the cot:
Safety Information
1.6 Symbol Glossary
The symbols defined below are used on the cot and/or in this users' manual. Ferno uses symbols recognized by the
International Standards Organization (ISO), the American National Standards Institute (ANSI), and the emergency
medical services industry.
Read the Users' Manual.
The load limit of the cot is
700 lb (318 kg).
700
lb
318
kg
Cot operation requires a
minimum of two trained
operators when a patient is
on the cot.
General Warning of
Potential Injury. Specific
warnings are indicated by
the symbols or words used
with the triangle symbol.
2
This safety label is affixed to the foot-end main frame of the cot. The General
Warning of Potential Injury triangle applies to all three specific symbols in
the box (see Symbol Glossary below).
238-1505-01-A
238-1505-01-B
This instruction label is affixed to the red Cot/Chair Conversion
Handle at the head end of the cot. It illustrates squeezing the handle
to change the cot to a chair and the chair to a cot.
