Fernbedienung CV1000, User Manual

Page: 35 / 58

- 67 -
3. To disable the beep, press and hold the rubber Stop key until the LED
blinks. To enable the Beep, press and hold the rubber Play key until
the LED blinks.
4. Beep Feature now toggled On or Off and the Main Setup Screen is
shown.
2. LCD Panel & Backlight On-Time :
The LCD Panel display and Backlighting will remain on for a User
selectable time period (10, 20, 30,……90 seconds). Power-on default is
30 seconds from last keypress. To set the LCD/Light On time :-
1. Press and hold Setup key until the LED remains on (occurring after
approximately 2-3 seconds) and the Main Setup Screen is shown.
2. Release Setup key.
3. Press and release the Setup key. The LED will blink to acknowledge
the keypress and the “9” Digit Setup Screen will be shown.
4. Press and release a digit key 1-9 (1=10 seconds, 2=20seconds, etc).
The LED will blink to acknowledge the keypress and the display will
return to the Main Setup Screen.
5. LCD/Light On time setting now complete.
3. User Master Reset :
To reset the remote defaults back to factory settings.
1. Press and hold Setup key until the LED remains on and display shows
the Main Setup Screen.
2. Release Setup key.
3. Press and hold the Setup key for approximately 5 seconds until the
LED blinks on then turns off.
4. Default Reset now complete and remote will be in normal TV Mode.