Fermax VIDEOMEMORY 128 DIGITAL, Manual

Page: 40 / 77

Pag 16
KIT
VIDEOMEMORY 128 DIGITAL
VIDEOMEMORY 128 DIGITAL
9 9
9 9
9
The Feeder must always be installed indoors. It may
be placed inside a DIN electrical switch box.
Current legislation demands that it must be installed
protected by a magnetothermal switch at the power
output.
9 9
9 9
9
Prior to installation of this equipment, connect the
necessary cables between the Monitor, Outdoor Pa-
nel and Feeder following the corresponding
installation diagram.
9 9 9 9 9
The Outdoor Panel is well protected against damp
and other atmospheric agents. However, in
permanently adverse weather conditions such as
heavy rain or saline environment it should be installed
in a sheltered place in order to prolong the active
lifespan of the equipment. Strong light may directly
affect the telecamera (backlight) and cause the image
lose contrast and/or clarity.
CHECK BEFORE INSTALLING KIT
9 9 9 9 9
For Monitor installation, select a flat, hard wall away
from direct heat sources (radiators, stoves,
heaters, ...) or smoky atmospheres (kitchens, etc.).
We advise installing the
Monitor in a spot where it
may be heard from anywhere in the house.