Page 12
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
SMILE VDS
-
There is a function configured by the installer to activate the audio channel
automatically upon receiving the call. See chapter b) Configuring conversation
mode. In this mode the conversation will finish as usual by pressing the AUDIO
button or after 90’’.
Wildcard button: Auto-Start / Main-Secondary Camera Selection.
·
With the monitor on standby,
press
and hold the wildcard
for 1 second to
switch the monitor on manually. To activate the audio, press the audio activation
button
.
· With video, press and hold this button for 2 seconds to sequentially select
between the main camera and the secondary camera (where one exists).
Notes:
- The
wildcard button
by default is for autostart, (even though you can
program it with another function, see chapter: e) Functions.
- If the channel is busy an error tone “BEEP” will be generated and auto-start
will not activate, nor will the call to the guard.
- The auto-start function is always used on the main panel except where a call
is received on the secondary panel. Once the conversation is over, auto-start
will activate on the secondary panel for 30 seconds. After this time it will
activate on the main panel.
-
If we enter into the functions menu for the first time, the auto-start button will
appear as a shortcut button, however, this function is also available on the
wildcard button
. If we exit without changing anything, we lose the auto-
start function on this button since in normal mode we can not assign the
same function as a shortcut button and a wildcard button
. So having
auto-start in both is an exception for recently manufactured monitors. In this
case auto-start can be performed by the:
o
Wildcard button
or
o
By pressing the shortcut button or
o
By selecting the icon of the auto-start function on the menu.
By the MENU.
(Pressing "Menu" for 3 seconds.
).
by Shortcut buttons
(Short press "Menu"
).
