Page 7
Size:
132mm × 112mm × 34mm
.
Power Supply:
5.8 Vdc, 3A (adaptor included 140 - 260 Vac.)
IMPORTANT NOTE:
Two devices cannot be connected in cascade.
INSTALLATION
The fibre optic devices (transmitter/receptor) are powered at 5.8 Vdc using adaptors
supplied with the equipment.
The equipment can be installed on the wall (requires 4 screws for its installation). It
can also be placed on a platform which supports a weight of 5 Kg.
For both devices:
o
Set up data, audio and contact conections on terminal grids D0, D1 and D3
respectively.
o
Connect the video coxial cable to terminal V1 and the fibre optic cable to the FTRX port.
o
Connect the power supplies provided and check that the PWR power supply led
(yellow) is on.
o
The SYN fibre optic status indicator led should be off if connected correctly. If there
is any problem with the fibre optic connection it will light up.
