Pag 29
Kit VIDEO PRIVATE
Kit VIDEO PRIVATE
1. Show the MASTER card
(three times).
The indicators will dis-
play the"door release
activation time
configuration mode"
setting.
Door opening time adjustment
This parameter, adjustable between 1 and 99, represents the time in seconds
that the door release remains activated after an activated card has been shown.
+
-
+
-
+ -
+ -
Master
another
card
+
-
+
-
Master
Beep!
Beep!
Beep!
Beep!
Beep!
Beep!
Beep!
2. Show any card (except the MASTER)
as many times as seconds to be set
for door release activation.
One time: one second
Two times: two seconds...
3. Show MASTER card at
the end, until indicators
display "normal mode."
1. Show the MASTER card
(four times).
The indicators will dis-
play the "door open time
configuration mode."
Adjusting open door time
This parameter, adjustable between 0 and 99, represents the time in seconds
after which the reader's built-in sonic alarm will start to sound, while the door
stays open. Installation of a magnetic door sensor is required. See diagram.
Initially, this function is disabled (value 0). To enable it, you must follow these
steps:
+
-
+
-
+ -
+ -
Master
another
card
+
-
+
-
Master
Beep!
Beep!
Beep!
Beep!
Beep!
Beep!
Beep!
2. Show any card (except the MASTER)
as many times as seconds to be set
for open door detection.
See note below.
3. Again show the MASTER
card at the end, until
indicators display "nor-
mal mode."
NOTE:
The first time that a card is shown disables this options. The other ones enable
the system and increase the time in seconds.
