background image

Page 8

 

 

The concierge can delete one single record, selecting it, or the complete list of register as well, 

tapping the “trash” icon during a few seconds (Confirmation is required). 

REMARK

The call log relates only to calls sent or received from the Concierge, and lost calls 

as well (answering machine). 

No call logs from panel to monitor calls or apartment to apartment. 

2.6 Alarm Log 

The LED and siren alarm on the concierge will be activated after the concierge receives alarm 

notification.  Those alarms will come from the monitor in the apartments or from panels 

(tamper, door sensor, etc.) 

The LED and siren will turn off after the guard touch CONFIRM icon. The alarm events from 

monitor and panels (tamper and door sensor alarm) can be found at the ALARM LOG interface. 

Each record includes: time and date, source and triggered zone. 

ALARM LOG is accumulative. There is not possible deleting complete log nor individual record. 

Monitoring and consequently ALARM LOG can be enabled or disabled from the concierge web 

server. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for MEET Concierge






















Reviews: