Cod. 97847 V06_17
3200292
Page 14/23
SETTING UP THE MODULE IN IP_AXES
To configure your IP_AXES software, you will need the module identifier. This is printed on a sticker
on the housing (e.g. ID: 00001). Make a note of this number.
Click on the “Techni
cal
” button and then “
Site configuration
”
.
Under the unit your module is connected to, click on “
Extension modules
” and then “
Add a module
IP_AXES I/O
”.
The following window will then be displayed:
Enter the identifier of your module.
Configure degraded mode operation
(loss of connection between the mod-
ule and the unit).
You can also rename each input and
configure their mode (2- or 4-state).
You can also rename each output
(“Sorties” (Outputs) tab).
