Page 9
L
LL
LLOFT DUO
OFT DUO
OFT DUO
OFT DUO
OFT DUOX
X
X
X
X
L
LL
LLOFT DUO
OFT DUO
OFT DUO
OFT DUO
OFT DUOX
X
X
X
X
Option 2: From the Monitor:
Monitors can be programmed on the screen menu.
Program the call number: Press
on the previous screen and access the screen to program
the residence's number (numbers from right to left).
Each time the
+
is pressed the number increases (starting with 1) and the
arrow
is used for
moving the cursor. A white cursor indicates where the digit will be entered. Program the
corresponding number and accept with
.
2222
The monitor will automatically connect wit the street panel, activating the camera. Enter the
calling code for this monitor from the panel. Depending on the type of panel installed:
- pressing the corresponding button or
- by entering the code + bell.
Notes:
- The time between steps 4 and 5 must be less than 2 and half minutes.
- Programming is always done from the panel activated as the master panel.
A different call tone is produced, confirming the monitor's programming and the camera’s image
is still viewed. A
fter a few seconds the monitor returns to standby.
MENU
F1
The selected option is displayed with the white line under the icon. Press
and a screen
appears confirming the selected option (image of a face) and a beep sounds on the monitor.
