Page 15
KITS
CAMARA CONTROL
CAMARA CONTROL
2
1
Fit the molex connector on the camera
rear to front of camera.
Align the back and front of camera and press to close. Fit the upper part first (1) then
press until the camera clicks into position (2).
O-RING
SEAL
It is very important not to forget to fit the
O-ring, as it carries out the camera’s
sealant function.
MOLEX
CONNECTOR
1
2
Introduce the safety screw on the lower part of the camera («allen» screw) in order to
avoid it could be opened.
