5
EN
b)
Use power tools only with speci
fi
cally
designated battery packs.
Use of any other
battery packs may create a
risk of injury and
fi
re.
c)
When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws or
other small metal objects that can make
a connection from one terminal to another
.
Shorting the battery terminals together may
cause burns or a
fi
re.
d)
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs,
fl
ush with
water. If liquid contacts eyes, additionally
seek medical help
.
Liquid ejected from the
battery may cause irritation or burns.
e)
Do not use a battery pack or tool that is
damaged or modi
fi
ed.
Damaged or modi
fi
ed
batteries may exhibit unpredictable behaviour
resulting in
fi
re, explosion or risk of injury.
f)
Do not expose a battery pack or tool to
fi
re or excessive temperature.
Exposure to
fi
re or temperature above 130 °C may cause
explosion. NOTE The temperature „130 °C“
can be replaced by the temperature „265 °F“.
g)
Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range speci
fi
ed in the
instructions.
Charging improperly or at
temperatures outside the speci
fi
ed range may
damage the battery and increase the risk of
fi
re.
6)
Service
a)
Have your power tool serviced by
a quali
fi
ed repair person using only
identical replacement parts.
This will ensure
that the safety of the power tool is maintained.
b)
Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD1136 and CD1138 type
rechargeable Battery packs with the charger. Other
types of batteries may burst causing personal
injury and damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction.
b)
Children being supervised not to play with the
appliance.
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with
a minimum thickness of 1.5 mm
2
. If you use
a extension cable reel, always fully unroll the
cable.
2. PRODUCT INFORMATION
Intended use
Only use the following batteries of FERM POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the charger.
CD1136
20V, 2Ah Lithium-Ion
CD1138
20V, 4Ah Lithium-Ion
The batteries of the FERM POWER 20V battery
platform are interchangeable with all the FERM
POWER 20V battery platform tools.
TECHNICAL SPECIFICATIONS
Model No
CDA1137
Charger input
220-240 V,50 Hz 0.4 A
Charger output
21 V
2.5 A
Charging time 2Ah battery
60 minutes
Charging time 4Ah battery
120 minutes
Recommended batteries
CD1136, CD1138
Weight
0.36 kg
