BOX CONTENT
1x
Socket ring
x1
Lamp base
TECHNICAL SPECIFICATIONS
Voltage:
220-240V
Dimmable:
No
Certification:
C E, IP20 , C lass II
Socket:
E27 socket base
Recommended Light source:
LED bulb m ax 12w.
Frequency:
50Hz
POST TABLE LAMP
GENERAL INSTRUCTIONS
WARNING:
The safety of this fitting can only be guaranteed if the following instructions are observed during both
installation and use. Please retain these instructions safely after installation.
PLEASE OBSERVE THE FOLLOWING GUIDELINES:
- Ensure that the power supply has been switched off prior to installation or removal of the product.
- Never undertake an electrical installation without the proper know ledge or training. If not familiar with
electrical wiring, contact a qualified electrician.
- The product may in no way be modified or tampered with. Any modification may compromise safety and
make the product itself dangerous to use. FERM LIVING does not accept any responsibility for products that
have been modified.
- This product requires the use of a lightbulb that is not included. Please use a lightbulb that has the relevant
safety certifications and approvals for your area.
- This product is meant for indoor use only.
- This appliance should not be disposed in a domestic trash receptacle and should instead be recycled appropriately.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
CLEANING INSTRUCTIONS:
- Use only a soft cloth to clean the product. Dampen the cloth with water and soap or a mild cleanser if needed.
MORE INFORMATION:
To access further information such as product overview and material descriptions, please visit our website
at www.fermliving.com. If you have any questions or comments, please do not hesitate to contact us
at info@ fermliving.com .
PLEASE READ BEFORE INSTALLATION
