4
3
5
Back
Seat
5.
It is now time to put the cushion covers onto the back and seat cushions. Please be aware that the back
and seat cushions are not the same size. Before attempting to place the covers onto each cushion, please
make sure that they match by checking the label.
3. You will now connect the right-sided frame (A). As explained in step 1, it is important that the screw holes on the rods and
on the right frame are aligned. If the screw holes do not immediately align, it is possible to carefully twist the rods until they do.
When the screw holes on the rods and on the right frame are aligned, use the Allen Key to place the six screws in the center of
the holes, and screw them in tightly. (B) Now, the screws on the left side of your Desert Sofa can also be tightened.
4. Proceed with steps 1-3 to connect the remaining parts of your Desert 3-Seater.
A
B
