ASSEMBLY PROCESS
CONTENT OF THE BOX
x 2
x 1
x 12
B
x 4
x 1
Lampshade direction can be adjusted
x 4
A
2
MOUNT UPPER + LOWER BASE
Start by drilling 4 holes in accordance
to the pencil marks. Insert the 4 rawlplugs.
Mount both the upper and lower base to
the wall by using the 4 longer screws (A).
3
INSERT LAMP ON BASES
Slide the 2 boxes on the backside
of the cylinder into the 2 bases.
4
MOUNT LAMP TO BASE
Finally, mount the lamp by
inserting the 2x6 shorter screws (B).
3 on each side of each base.
Start with the upper base
and continue to the lower base.
CHOOSE A POSITION
1A: At first; use a pencil
to draw a vertical line to
mark the prefered position.
Start at the highest point
and use a level to make
sure the line is in level all
the way down.
1B: Secondly; mark the
drilling holes for the upper
and lower base. Start by
marking the highest placed
hole (
1B) for the upper base.
Use the measurements
indicated here to mark the
3 lower holes in reference
to the highest hole.
1
A
A
Illustration:
How to mount 1 of 2 bases.
B
B
B
B
Frontal view
Illustration:
How to mount
1 of 2 bases.
1A
1B
80 mm
564 mm
80 mm
NB: The included
rawlplugs are made
for concrete walls.
Not suitable for
plaster walls.
