3
EN
HOT AIR GUN
The numbers in the following text correspond
with the pictures at page 2
Always read the instruction for electrical
products carefully before use. It will help
you understand your product more easily
and avoid unnecessary risks. Keep this
instruction manual in a safe place for
future use.
1. MACHINE INFORMATION
Technical specifications
Voltage
220-240 V~
Frequency
50 Hz
Power input
2000 W
Weight
0.9 kg
IP Class
IP 20
Position I
Air flow
250 l/min
Air temperature
50 °C
Position II
Air flow
250 l/min
Air temperature
50-600 °C
Position III
Air flow
500 l/min
Air temperature
50-600 °C
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardised test given in EN 60745; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns
Product information
Fig. A
1. Switch
2. Ventilation slots
3. Nozzle outlet
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Additional safety instructions
When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
Read all these instructions before attempting to
operate this product and save these instructions.
Before using the appliance
• Check the following:
• Make sure the voltage of the hot air gun
corresponds with the power voltage;
• Are the mains lead and the mains plug
in a good state: strong, without ravels or
damages.
• Avoid the use of long extension cables;
• Do not use the appliance under moist
circumstances;
• The metal mouthpiece gets hot. Watch out and
do not touch the metal mouthpiece;
• Prevent damage of the heating element.
Do not lock or block the mouth piece;
• Do not leave the appliance when switched on;
• Do not use the appliance for drying hair or for
drying living human beings in general;
• Do not use the appliance in a bath, above
water or in spaces where easy inflammable
liquids are used.
This appliance operates at a temperature
of 600 degrees without visible signs of
this temperature (no flames), still there is
a chance of fire risk. Watch out for the
hot air stream from the mouth piece. This
air stream can cause burns.