- 2 -
+
+
M A I N S C O N N E C T I O N A N D R E M O T E B A T T E R I E S
MAINS CONNECTION
The TV is suitable for use on a.c. mains supply, 220-240V, 50 Hz only. It must not
be connected to d. c. mains.
NOTE : The mains lead of the TV is fitted with a moulded plug. If the mains sockets
are not compatible or if for any reason the plug is removed please follow these
directions :
The moulded plug cannot be rewired and if removed must be disposed of safely.
DO NOT under any circumstances plug the severed plug into any mains socket as
this could result in electric shock.
IMPORTANT : If the plug is removed rewire new plug as follows :
The wires in the mains plug are coloured in accordance with the following code :
BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond
with the coloured markings identifying the terminals in your plug, proceed as
follows :
BLUE wire to the terminal coded N (Neutral) or coloured black.
BROWN wire to the terminal coded L (Live) or coloured red.
DO NOT make any connection to the terminal in the plug which is marked by the
letter E or by the safety earth symbol
or coloured green or green and yellow.
A fused plug must be fitted with a 5A fuse approved by ASTA or BSI to BS 1362
and fuse covers must always be securely replaced.
REMOTE BATTERIES
The remote control requires two batteries size AAA as supplied with the unit.
Unclip the cover at the rear and insert the batteries the correct way round as
shown. The ends are usually and –. Replace the batteries when the unit
no longer operates at normal viewing distances.
For a clearer environment, please dispose of used batteries in the containers
provided for this purpose.
NOTE
When replacing batteries do not mix old and new - do not mix makes and types.
Alkaline types are recommended for long life. Never risk damage to the remote
control by extreme heat - do not leave close to a radiator or on a window ledge in
direct sunshine.
5A fuse
M 3673 GC/GCT GB 8/10/1997 17:39 Page 2
