HearMe 200BT
MARKINGS AND SIGNS APPLIED TO THE DEVICE
Risk of electric shock - do not open. This
notice warns the user not to open the receiver
housing. The housing may be opened solely by
authorized service technicians.
CE logo.
The logo informs that the receiver conforms to the
terms and conditions of Directive 2004/108/EC
concerning observance by Member States of
provisions
regulating
electromagnetic
compatibility, and to the terms and conditions of
Directives 2006/95/EC concerning observance by
Member States of provisions regulating low voltage
electricity and safety with relation to the handling
and operation of electrical equipment.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and do
not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
R&TTE
Hereby Ferguson Sp. z o.o., declares that the
device is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC. You can find the Declaration
of Conformity on www.deklaracje.ferguson.pl
This product has been designed, tested and
manufactured according the European R&TTE
directive 1999/5/EC.
Double insulation logo.
This logo informs that the devices an electrically
safe device, provided that it is used in accordance
with the recommendations set forward in the
chapter concerning safety.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative
consequences for the environmental and human
health.
Hot surface mark
CAUTION: HOT SURFACE. DO NOT TOUCH.
The top surface over the internal heat sink may
become hot when operating this product
continuously. Do not touch hot areas, especially
around the “Hot surface mark” and the top panel.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this logo is attached to a product, it means a
financial contribution has been paid to the
associated national recovery and recycling system.
3
