9
Quick Installation
Step 1:
Check the cable connections
Prior to powering up the receiver, ensure that all cables are correctly connected. Ensure that the unit is
connected to A/V equipment and the power socket.
Step 2:
Insert the CAM (with smart card) released by your service provider.
Insert the CAM into the slot according to the arrow direction drawn.
Note:
Don’t attempt to remove or insert the CAM while the receiver is powered on or initializing.
Step 3:
Turn on the television and tune it to relevant video mode.
Step 4:
Power on and Set STB
Turn on power switch ON/OFF of your receiver. The startup OSD will be shown on the TV screen.
Receiver initialization includes loading of the embedded system parameters. If there are some
programs stored in the STB, channel number will be shown on the LED area. Otherwise , Install Guide
will show.
Use keys
▲▼
move the cursor, keys
change the item select.
Press <MENU> or <EXIT> to exit the Install Guide .
Step 5:
Search program
Press <OK> to save current set and enter AUTO SCAN.
Step 6:
Play program
To display TV program list, press <OK> button directly at the non-menu mode, select the desired
program by using
▲▼
buttons and press OK button to watch.
