From time to time new services are launched which may require your receiver
to be upgraded with new software before you can use them. Sometimes new
features may be introduced to enhance your receiver.
Notification
This menu is automatically displayed when a new “Over-
Air-Download” is detected after switch on. You now have
three options.
●
To start the download immediately, press .
●
Select
DOWNLOAD LATER
to set a timer event to
receive the new software during the night.
●
Refuse the download at this time by pressing .
(However, the download may be re-detected and
indicated the next time you switch on.) It is highly
recommended that you keep your receiver up to date.
Check for download
You can manually check to see if new software is available for download. If
there is one available, you will see the download menu as above.
To check:-
1. Press , select
SETUP
and press .
2. Select
CHECK FOR DOWNLOAD
and press .
3. If no download is available, press to exit.
4. Press to start. Alternatively, schedule the download for later.
The download can take up to 20 minutes so please be patient. After the
download, details about the new software will be displayed for you. There may
also be a telephone number to call in case of any difficulty.
If the download fails, try again later.
During part of the download,
DO NOT
switch off the receiver, this warning is
displayed on screen.
12
UPGRADING YOUR RECEIVER
●
Quit
●
Quit
8510 FDT2000 Rev2 inc scart 17/2/03 6:27 pm Page 12
