Ferguson F01SDB, Instruction Manual

Page: 13 / 26

Getting Started
11 11
Turn on your TV set and select the corresponding AV input (with the AV key, or
simular, on the television remote control).
Turn on the main power supply to the STB, the indicator on the front of the unit will
turn red and then green. In standby mode, the indicator light will be red. In
working mode, the indicator light will be green.
If you use the STB for the first time or have deleted all channels information
in the STB, a "TV Setting" menu displays.
Press the "LEFT" or "RIGHT" cursor button to choose either "16:9" or "4:3".
Press the "OK" button to continue installation , a confirmation message
window displays as right.
Press the "LEFT" or "RIGHT" cursor button to highlight "confirm".
Press the "OK" button to continue. " Scan Progress" menu will appear and list
the channels as they are found. A bar appears below the listing panel that
indicates the progress of the channel search.
When all available radio and television channels have been found, the
channel at the top of the list will be viewed.
Switching on for the first time