8.5 Connection to the local network
In order to connect the receiver to a local network, use an RJ45 cable. We recommend
that you restart the receiver whenever the network settings are changed. WiFi is
supported only when plugged into the USB port is free WiFi USB adapter based on
Ralink chipset Rt5370. Available as a separate accessory.
8.6 Connection of another receiver
Another receiver may be connected through the LOOP socket. Please keep in mind, however,
that only one device may be used at one time! Permanent damage may result if both are
turned on simultaneously.
NOTE:
LOOP output in terrestial receivers is the only signal loop-through. This is not a
modulator, so the receiver will not let go of the image decoding (DVB-T and USB) in the
form of an analog signal on this connector.
13
Summary of Contents for Ariva T760i
Page 1: ...User manual T760i English...
