Ferei HL08 II, User Manual

Page: 2 / 2

Patented product, counterfeiting not allowed.
Shenzhen FEREI Lighting Co., Ltd .
3rd Industrial Zone, Xiakeng Village, Tongle, Longgang District, Shenzhen 518116, China. TEL: 0086 755 8480 7942 / 0086 755 8480 7943 • FAX: 0086 755 8480 7944.
E-mail: ferei@ferei.com • Website: www.ferei.com
power to cool down the lamp wick, the brightness of the light will
corresponding fell and get lower. And in comparison outdoor using
with the indoor using, outdoor area using will get wind to cool it down
and heat-radiation is better, the LED will crank up the power and the
lights become brighter, and the process of ascension brightness will
smooth and slow without flashes.
At the same time, the intelligent temperature control system will lead
the run time get longer (may be the standard of twice to five times).
Particularly, the run time will depend on the temperature, running
speed even the wind strength, so the actually run time will be a little
different according to the environment of the lamp using.
WARM TIPS
In order to avoid accidents, please pay attention to the following tips:
•
Never use damaged, discolored or leaking batteries.
•
Never use batteries with a damaged sleeve or foil covering.
• Always use 18650 batteries with safety certificates.
• If the light gets unusually hot when in use, turn it off and check
battery appearance.
• Never store the battery into the battery holder.
• Recharging is finished when the LED indicator turns to green.
• The battery remains at a normal temperature during recharging. If it
gets unusual hot, stop recharging and take the battery out.
• Do not dissemble the charger kit by yourself if the battery couldn’t be
recharged.
• The battery can be used at any time once being recharged. If it
is left unused for long periods, it should be recharged for 4 hours
every three months. After being charged they should be slightly
discharged for 10-20 minutes before storage.
• Be sure to always recharge the battery in a safe place and do not
leave unattended while charging.
MAINTENANCE
• Wipe the glass lens with a soft cloth at regular intervals to ensure
maximum light transmittance (avoid using corrosive detergents).
• Ensure the cable plug and inside of the battery box remain free of
dirt and debris.
• Unplug the cable from the battery box when unused for extended
periods.
WARNING
• It is a lighting tool, not a toy. Keep it away from children.
• Should not be aimed directly at the eyes of humans or animals
• Do not place the light face / lens down when turned on.
• The surface of the flashlight may become hot during extended use.
• Do not dismantle or dissemble any structural parts of the light,
especially the seal parts.
• Dry the light surface with soft cloth immediately after exposure to
water or any corrosive substance.
• Always remove batteries during long periods of inactivity (more than
30 days).
• Ferei reserves the right of interpretation of this manual.
USER MANUAL
Rechargeable
LED Headlamp
HL 08II
HL08II  PRODUCT SPECIFICATIONS
LED CREE XPG3 COOL WHITE
ANSI/FSC MAX CUSTOMIZED SETTING
POLICE
STROBE
SLOW
STROBE
FAST
STROBE
SOS
LIGHT PER 100% 10% 20% 30% 40% 50% 60% 70% 80% USERDEFINED
OUTPUT LM 600 60 120 180 240 300 360 420 480 USERDEFINED
RUNTIME INDOOR STATIC TESTING AT 28ºC MAX OUTPUT 4.0 40 20 13 10 8.0 6.7 5.7 5.0 >10
RANGE M OVER 237 METERS
MAXIMUM INTENSITY 14042 CD
WATERPROOF RATING IPX4
ANTIDROP 1M
DIMENSION 30 MM HEAD DIAMETER
BATTERY 1 X 18650 BATTERY
WEIGHT 140 G EXCLUDING BATTERY
NOTE: THE ABOVE PARAMETERS ARE TESTED BY USING 1 PCS 3400 MAH 18650 LIION BATTERY
DIAGRAM
*
PHOTOS ARE FOR REFERENCE ONLY, PRODUCTS IN KIND PREVAIL!
SWITCH
ADJUSTMENT
DIRECTION
HEAD
ADJUSTMENT
DIRECTION
ADJUSTMENT
BUCKLE
BATTERY HOLDER
18650
HEAVY DUTY
ELASTIC FABRIC
5.5 DC PLUG CABLE