![background image](http://html.mh-extra.com/html/ferax/bcd-1013/bcd-1013_manual_553131037.webp)
33
once with water and contact a doctor immedia-
tely!
• Read and note the operating instructions and
safety notes for the charger and battery block
before use!
• NB! Only use the charger and battery block
that were supplied by the manufacturer - oth-
erwise you will risk an accident.
• Protect the charger, battery block and power
tool from moisture, e.g. rain or snow.
• Always check that all cables are connected
correctly before using the charger.
• If you discover that a cable is damaged, you
should not use the charger again. Have the
damaged cable replaced immediately.
• When the charger is not in use, the mains
plug should be removed from the power
socket. Do not pull out the plug by grasping
the cable.
• If the charger has been dropped or has other
-
wise been exposed to high mechanical stres-
ses, you should have it checked for damage
by an authorised dealer before using it again.
Damaged parts should be repaired.
• Exercise caution when handling the bat
-
tery block and do not drop it or expose it to
impacts.
• Never attempt to repair the charger or battery
block yourself. Repairs must always be car-
ried out by an authorised dealer - otherwise
you risk an accident.
• Before cleaning or servicing the charger or
battery block, always pull the plug from the
charger socket.
• Never charge the battery block when the
ambient temperature is below 5 °C or above
40°C.
• The air vents in the charger must never be
blocked.
• The battery block must not be short-circuited.
A short-circuit will cause a high
current to flow. This may result in
overheating, the danger of fire or
explosion of the battery block.
This may damage the battery block or the
user may risk an accident.
Therefore:
• Do not connect any cables to the poles of
the battery block.
• Take care that there are no metal objects
(nails, paper clips, coins, etc.) on the con-
tact surface of the battery block.
• Do not expose the battery block to water or
rain.
• Only use the battery block supplied in
combination with this cordless drill/ screw-
driver so as to avoid faults and/or risks to
persons.
• A damaged battery block or one that can no
longer be charged must be disposed of as spe-
cial waste. Do not discard it with household
waste.
• Never throw the battery block onto a fire or
into water. This will risk explosion!
5.3 Electrical safety
Always check that the voltage on the
batterypack corresponds to the volta-
ge on the rating plate. Also check that
your mains voltage corresponds to
the input voltage of the battery char-
ger.
The battery charger is double insula-
ted in accordance with EN60335;
therefore no earth wire is required.
5.4 Replacing cables or plugs
Immediately throw away old cables or plugs
when they have been replaced by new ones. It
is dangerous to insert the plug of a loose cable
in the wall outlet.
• Remove the battery block. When the power
tool is not being used, prior to maintenance
and when changing tools such as the clam-
ping chuck, and drill.
• The tool is suitable for use as a screwdriver