5
Playing a record
1.
For first time use, take off the protective plastic cover from the stylus as illustrated below:
2.
Unlock the Tone Arm from the holder as illustrated above.
3.
Place the Record on the center spindle.
4.
Note: If you are playing a 45 RPM Single (small size record), place the supplied 45 RPM adapter to the
center spindle then place the record on it.
5.
Slide the speed selector to 33 45 or 78 to match the play speed of the record.
6.
Set the auto stop control to ON if you want the turntable to stop turning when it has reached the
end of the record. If the switch is set to OFF , the turntable will continue turning at the end of the
record.
7.
Turn on the Power Switch to on position, which will go to the PHONO mode position automatically, the
switch also controls the volume.
8.
Raise the Lever to raise the Tone Arm then move it to the top of the desired location of the record.
Release the Lever to put the Tone Arm onto the record. Playing will start automatically.
9.
When the record has stopped playing, the turntable will stop automatically if the Auto stop switch is in
the ‘ON’ position. If the Auto stop switch is set to the “OFF’ position, the turntable will continue
turning at the end of the record.
10.
Raise the Lever to raise the Tone Arm then put it back to the Tone Arm Holder position
.
Release the Lever then lock the Tone Arm on the Holder.
BT pairing
Ensure Tone Arm is locked in Tone Arm holder.
Turn on the Power Switch, it will automatically enter BT mode. Blue light is pairing mode and red light
is record player mode.
On your phone or other device, scan for
“
SSX22P165
”.
(See your
device’s
instruction manual for
scanning instructions if you are not familiar with pairing). Select
“
SSX22P165
”
from the list when it
appears on your device screen.
