4
OVERVIEW
1. Power & volume control knob
To power on the record player, turn this knob clockwise until it clicks. When powered on, use this knob to adjust the volume
for the internal speakers and headphones. To turn off the record player, turn this knob counter clockwise until it clicks.
2. Headphone connector
Connect your headphone with this 3.5mm(1/8) jack connector.
3. LED indicators
4. AUX input
3.5mm(1/8) jack connector for auxiliary input.
5. Function switch knob
Knob to select phono, aux or BT input.
6. USB port
Use the included USB cable to connect your turntable to your computer. The USB connection will send audio from the
turntable to your computer.
7. DC IN port
Connecting the 12Volt/DC power adaptor.
8. RCA Line output
The sound signal from long-playing record is sent to this line output. Connect this signal to the line input of an such as an
amplifier or a line input of a CD/DVD player.
9. 45RPM Adaptor
This adaptor allows you to play 45RPM records.
10. Autostop Switch ON/OFF
This switch turns auto stop on or off. When the automatic stop is enabled, the platform will start rotating as soon as the tone
arm is placed over the record and will stop rotating when it has reached the end of the record. Some vinyl records stop
before the end or do not stop when the end is reached. In this case set Auto-stop to OFF.
11. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
12. Arm Clip
This specially designed arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed to
remain in the up position while unlocked.
13. Cartridge with needle
When the turntable is not in use, it is recommendable to place the removable protection cover on the stylus.
14. Platter
Place your record here.
OPERATION
1.
Connect the record player with the power adapter and plug the other end into a wall power outlet.
2.
Remove the white protective needle cover by gently pulling towards the front of the unit.
3.
Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM)
according to the record.
4.
Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge
onto the desired position of the record and the turntable player starts to play.
5.
Turn the volume control knob clockwise to adjust the volume.
Noted:
If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control is
turned OFF, record will NOT stop automatically when finished.