351.183 Wireless DVR-kit
Start-up manual.
Connect the DVR set to a monitor or other video-source.
You can do this with a VGA connector or a DVI connector.
Connect the mouse to one of the USB-ports.
Connect the camera’s with the 12V 1A power-supplies to the power net.
To connect the DVR set use the 12V 2A power supply.
If connected to the power grid the following screen should appear.
It is possible the “Setup Wizard” automatically starts, if not you can start it by pressing the right
mouse button and select the Wizard setup function.
You will be shown the above picture, select “OK”.
There is no password set yet.
