10
STEP-BY-STEP
GUIDE
0800 002 725
|
fentec.co.nz
VERTICAL CONVERSION GUIDE
How to Convert the orientation of your VistaWall Slat fence
Fitting bottom slat
Depending on the total width of the bay, the
maximum post width face to face is 1800mm.
Lay the additional slat horizontal and screw
fix on either end. Trim channel to the total
length of the exposed slat between posts.
Screw fix this to the top of the slat, this will
become the base of the vertical slats.
Fitting vertical slats
Starting from one side, fix one slat against one side
and work across using the 18mm spacers provided.
Tip: use a strap or similar close to the top of the
post to secure the slats prior to fitting the top cap
Fitting top cap
After fitting all the slats, place the top cap
across and screw fit to secure the fence
Slat
Post
Slat channel
