Water
Resistance
IP66
Notice: The abovementioned parameters (lab-tested by using two Fenix 3.6V/2600mAh
rechargeable 18650 Li-ion batteries) may vary between headlamps, batteries and environments.
◎
Uses Cree XM-L2 and XP-G2 R5 LED’s with a lifespan of 50,000 hours
◎
Powered by two 18650 or four CR123A batteries
◎
Headlamp: 77mm Length x 52mm Width x 34mm Height
Battery case: 115mm Length x 56mm Width x 30mm Height
◎
Weight: 285 grams (excluding batteries)
◎
Accessories: cable clip, top headband mount, spare O-ring, belt clip, USB charging cable,
2*cable buckle, 2* Fenix 3.6V/2600mAh 18650 rechargeable Li-ion batteries
◎
Lockout function for safe and convenient carrying
◎
Free switching between spot- and neutral white floodlight, or use them simultaneously
◎
Belt-worn battery case can be placed in pocket or backpack, which reduces the load bearing
of user’s head and maintains optimal performance in cold areas
◎
The battery case can be used as a power bank for charging other digital devices
◎
The 18650 batteries are charged alternately via Micro USB port for balanced battery level
◎
60° tilt mechanism directs the beam where needed
◎
Reverse polarity protection, to protect from improper battery insertion
◎
Aluminum alloy die-casting design for security and better heat dissipation
◎
Toughened ultra-clear glass lens with anti-reflective coating
Operating Instruction
Lighting Mode
(Factory default is “High” upon first use; thereafter intelligent memory circuit is
activated)
Spotlight switch
: press and hold the switch for 0.5 seconds to turn ON/OFF the
spotlight. Click to cycle through High→Turbo→Low→Med.
Floodlight switch
: press and hold the switch for 0.5 seconds to turn ON/OFF the
floodlight. Click to cycle the lamp through High→Turbo→Low→Med.
Note: The spot- and floodlights are controlled by separate switches.
Intelligent Memory Circuit
The headlamp memorizes the last brightness level used. When next turned on, the previously
used brightness level is recalled.
