Fenix G56, Manual, Page: 22 / 36

Fenix G56
22
Rev. 0.7 – V-Link only
Now, lay the car on a flat setup
board and make the final fine
tuning of the links length.
Chassis and motor pod must lay
flat on the setup board.
Take the proper time for this
setting.
Check our channel on Youtube
for some explicative video.
https://www.youtube.com/channel/UCDZqN09hr2EaI7qHCMjUcjQ
Bag D – Common instructions
Using the parts remaining from Bag C
Install now the 2 dampers and the shock holder using 4
x HW008 3x6 button screw.
Note:
When use the V-link configuration, according the
position of the V-link, dampers position might have to
be relocate on the upper side of the shock holder.
Fix the G56-006 bumper and fix it using 2 x HW004
M3x10 countersunk and 2 x HW002 M3 self-locking
nut.
Fix the bodypost using 2 x HW007 M3x8
countersunk screws.